-
Areal density（mg/cm2）：Areal density refers to the mass per unit area, which in this case is (the mass per unit area ofthe region ignoring the volume). Compacted density（g/cm3）：The compacted density indicates the mass contained in a unit volume, which has a lot to do with the properties of the material itself. Thickness：The total thickness of the material and the foil is generally expressed in micr...
read more
-
The dew point is the temperature at which moisture condenses. When the water vapor content in the air remains unchanged and the air pressure is kept constant, the temperature at which the air is cooled to saturation is called the dew point temperature (Td), or dew point for short. It can also be understood as the temperature at which water vapor and water reach equilibrium. The difference between ...
read more
-
During the charge and discharge process of the battery, as the charge and discharge depth changes, the voltage is also constantly changing. If we use capacity as the horizontal coordinate and voltage as the vertical coordinate, we can get a simple charge and discharge curve, which contains many clues about the battery's electrical performance. These curves drawn with the battery cell parameters su...
read more
-
The inconsistency of energy storage batteries mainly refers to the inconsistency of parameters such as battery capacity, internal resistance, and temperature. Our daily experience is that when two dry batteries are connected in positive and negative directions, the flashlight will light up, and we don’t consider consistency. However, once batteries are used on a large scale in energy storage syste...
read more
-
Improving the initial coulombic efficiency of lithium-ion batteries is a complex and important topic, which is directly related to the energy utilization and overall performance of the battery. The following is an in-depth analysis of the factors affecting the first coulombic efficiency of lithium-ion batteries from multiple perspectives, and proposes corresponding solutions. 1.Factors affecting t...
read more
-
As a key equipment in battery production, the calibration accuracy of the coating head of the lithium battery coating machine directly affects the coating quality, and thus affects the performance and life of the battery. This article will analyze the calibration method of the lithium battery coating machine die head in detail from three levels: basic calibration, positioning calibration, and fine...
read more
-
Recently, Professor Zhang Qiang's team from the Department of Chemical Engineering at Tsinghua University published the research results on the bulk/surface interface structure design of lithium-rich manganese-based cathode materials for all-solid-state metal lithium batteries. They proposed an in-situ bulk/surface interface structure regulation strategy, constructed a fast and stable Li+/e−pathwa...
read more
-
The stability and dispersibility of battery slurry have an important impact on the properties of electrodes and finished battery products. So how to characterize the stability and dispersibility of battery slurry? Characterization method of battery slurry stability 1. Solid content method The solid content test method is a low-cost and easy-to-test method. Its principle is to place the slurry in a...
read more
-
WANG Kunpeng ,1, LIU Zhaolin2, LIN Cunsheng2, WANG Zhiyu ,1,2 1. State Key Lab of Fine Chemicals, School of Chemical Engineering, Dalian University of Technology, Dalian 116024, China 2. Branch of New Material Development, Valiant Co., Ltd., Yantai 265503, China Abstract In comparison to Li-ion batteries, Na-ion batteries offer the benefits of low cost, good low-temperature performance, and safety...
read more
-
The current production efficiency and yield of large cylindrical batteries are still relatively low, and there are still the following process difficulties in achieving high-efficiency mass production: 1) Full-tab forming: The difficulty lies in controlling the flattening accuracy and strength to avoid damage to the current collector or the generation of debris, dust, etc. 2) Collector plate and p...
read more
中文
français
Deutsch
italiano
español
português
Nederlands
日本語
한국의
subscribe to us 
