Although high-voltage lithium battery materials are getting more and more attention, these high-voltage anode materials are still unable to achieve good results in practical production and application. The biggest limiting factor is that the electrochemical stability window of the carbonate-based electrolyte is low. When the battery voltage reaches about 4．5（vs．Li/Li＋）, the electrolyte begins to p...

Lithium Chip Metal lithium chip used in the laboratory can provide a far greater source of lithium, Lithium chip shall have less impurities and the size shall be larger than that of the electrode to be measured, and the purity of lithium chip shall not be less than 99.9%. General requirements for lithium chip in the preparation of coin cell: diameter 15 ~ 15.8mm (the corresponding electrode size i...

After the battery cells drying process, the battery cell will be tested for moisture and meet the standard before proceeding to the next step of battery electrolyte filling process（cylindrical cell）. Put the roasted battery cell into the vacuum glove box quickly, weigh it and record the weight, place the injection cup on the upper side of the battery and add the electrolyte into the cup. If not su...

After pouch cells top sealing and side sealing, need to do X-ray to check the alignment of the battery cells, then put the battery cells into the drying room for drying(you can also use the drying oven to drying the battery cells). After the battery cells drying process is completed, The next step is electrolyte filling process and primary sealing process. Through the introduction of the previous ...

The development of electric vehicles is in full swing, and the power battery is one of the most important parts. Its development has a decisive effect on the battery life and safety of electric vehicles. Recently, we often hear some terms such as solid-state batteries, SVOLT’s jelly batteries, NIO’s Nickel 55 ternary Cell, IM Motors doped with silicon to supplement lithium, and CTP/CTC technology....

MOF/Poly(Ethylene Oxide) Composite Polymer Electrolyte for Solid-state Lithium Battery LIANG Fengqing, WEN Zhaoyin 1. CAS Key Laboratory of Materials for Energy Conversion, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050, China 2. Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences, Beijing 100049, China Abstract Solid...

Flexible Binder for S@pPAN Cathode of Lithium Sulfur Battery- part one LI Tingting, ZHANG Yang, CHEN Jiahang, MIN Yulin, WANG Jiulin. Flexible Binder for S@pPAN Cathode of Lithium Sulfur Battery. Journal of Inorganic Materials, 2022, 37(2): 182-188 DOI:10.15541/jim20210303 Abstract Sulfurized pyrolyzed poly(acrylonitrile) (S@pPAN) composite as cathode material of Li-S battery realizes a ...

Flexible Binder for S@pPAN Cathode of Lithium Sulfur Battery- Part 2 LI Tingting, ZHANG Yang, CHEN Jiahang, MIN Yulin, WANG Jiulin. Flexible Binder for S@pPAN Cathode of Lithium Sulfur Battery. Journal of Inorganic Materials, 2022, 37(2): 182-188 DOI:10.15541/jim20210303 Physical Properties Characterization The existing forms of sulfur in the S@pPAN materials were investigated by XRD. In...

Dual-lithium-salt Gel Complex Electrolyte: Preparation and Application in Lithium-metal Battery GUO Yuxiang, HUANG Liqiang, WANG Gang, WANG Hongzhi. Dual-lithium-salt Gel Complex Electrolyte: Preparation and Application in Lithium-metal Battery. Journal of Inorganic Materials, 2023, 38(7): 785-792 DOI:10.15541/jim20220761 Abstract Metallic Li is one of the ideal anodes for high energy de...

Na3Zr2Si2PO12 Ceramic Electrolytes for Na-ion Battery: Preparation Using Spray-drying Method and Its Property Author：LI Wenkai, ZHAO Ning, BI Zhijie, GUO Xiangxin. Na3Zr2Si2PO12 Ceramic Electrolytes for Na-ion Battery: Preparation Using Spray-drying Method and Its Property. Journal of Inorganic Materials, 2022, 37(2): 189-196 DOI:10.15541/jim20210486 Abstract Na-ion batteries, ...

Sergiy Kalnaus, et al. Solid-state batteries: The critical role of mechanics. Science. 381, 1300 (2023). Solid-state batteries with lithium metal anodes have the potential for higher energy density, longer lifetime, wider operating temperature, and increased safety. Although the bulk of the research has focused on improving transport kinetics and electrochemical stability of the materials and inte...

Recent progress on anode for sulfide-based all-solid-state lithium batteries —— Part 1 Lithium metal anode Author: JIA Linan, DU Yibo, GUO Bangjun, ZHANG Xi 1. School of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai 200241, China 2. Shanghai Yili New Energy Technology Co. , LTD. , Shanghai 201306, China Abstract All-solid-state lithium batteries (ASSLBs) exhibit hi...

Continuing from the previous article Recent progress on anode for sulfide-based all-solid-state lithium batteries —— Part 2 other anodes Author: JIA Linan, DU Yibo, GUO Bangjun, ZHANG Xi 1. School of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai 200241, China 2. Shanghai Yili New Energy Technology Co. , LTD. , Shanghai 201306, China Lithium alloy anode Due to ...

Recent Progress of Boron-based Materials in Lithium-sulfur Battery Author: LI Gaoran, LI Hongyang, ZENG Haibo MIIT Key Laboratory of Advanced Display Materials and Devices, Institute of Nano Optoelectronic Materials, School of Materials Science and Engineering, Nanjing University of Science and Technology, Nanjing 210094 Abstract Lithium-sulfur (Li-S) batteries play a crucial role in the...

Author: XIA Qiuying, SUN Shuo, ZAN Feng, XU Jing, XIA Hui School of Materials Science and Engineering, Nanjing University of Science and Technology, Nanjing 210094, China Abstract All-solid-state thin film lithium battery (TFLB) is regarded as the ideal power source for microelectronic devices. However, the relatively low ionic conductivity of amorphous solid-state electrolyte ...

In recent years, there has been rapid development of sulfide solid electrolytes including Li2S-SiS2, Li2S-B2S3, Li2S-P2S5, Li(10±1)MP2S12(M=Ge, Si, Sn, Al, P),  Li6PS5X(X=Cl, Br, I). In particular, the thio-LISICON structure sulfide, represented by Li10GeP2S12 (LGPS), exhibits extremely high room temperature lithium ion conductivity of 12mS/cm exceeding that of liquid electrolytes, which has ...

Why are all-solid-state batteries an industry trend? High security: The safety issues of liquid batteries have always been criticized. The electrolyte is easily flammable under high temperature or severe impact. Under high current, lithium dendrites will also appear to pierce the separator and cause short circuit. Sometimes the electrolyte may undergo side reactions or decompose at high temperatur...

The dew point is the temperature at which moisture condenses. When the water vapor content in the air remains unchanged and the air pressure is kept constant, the temperature at which the air is cooled to saturation is called the dew point temperature (Td), or dew point for short. It can also be understood as the temperature at which water vapor and water reach equilibrium. The difference between ...

Recently, Professor Zhang Qiang's team from the Department of Chemical Engineering at Tsinghua University published the research results on the bulk/surface interface structure design of lithium-rich manganese-based cathode materials for all-solid-state metal lithium batteries. They proposed an in-situ bulk/surface interface structure regulation strategy, constructed a fast and stable Li+/e−pathwa...

WANG Kunpeng ,1, LIU Zhaolin2, LIN Cunsheng2, WANG Zhiyu ,1,2 1. State Key Lab of Fine Chemicals, School of Chemical Engineering, Dalian University of Technology, Dalian 116024, China 2. Branch of New Material Development, Valiant Co., Ltd., Yantai 265503, China Abstract In comparison to Li-ion batteries, Na-ion batteries offer the benefits of low cost, good low-temperature performance, and safety...