-
According to the operation mode, can be divided into:manual winding machine,semi automatic winding machine,automatic winding machine.Lithium battery winding machineand the capacitor winding machine, buyers usually according to classification of origin, mainly divided into: domestic winding machine, winding machine, South Korea Japan winding machine. Battery manufacturers generally small scale will...
read more
-
The Electrode Coating Machine is the key equipment for the production of lithium battery electrode. Because it directly affects the subsequent rolling operation, and even affects the performance of the entire battery. At present, the mainly lithium battery electrode coating process is: scraper type, roll to roll transfer coating type and a slit extrusion type. General speaking, laboratory equ...
read more
-
The main components of lithium ion battery include cathode, anode, electrolyte, membrane, etc. The storage and release of lithium ion energy is realized in the form of REDOX reaction of electrode materials, and the cathode active material is the most critical core material of lithium ion battery. Professor GOODENOUGH, the father of lithium battery, has made a great contribution...
read more
-
The lithium-air battery is a new type of high-capacity lithium-ion battery developed by the Japan Industrial Technology Research Institute and the Japan Society for the Promotion of Science (JSPS). The battery uses lithium metal as the negative electrode, oxygen in the air as the positive electrode, and the electrodes are separated by a solid electrolyte; the negative electrode uses an&n...
read more
-
The battery separator plays a major role in lithium ion battery conduction lithium ions and isolation between the positive and negative electrode electronic contact. It is an important component to support the battery to complete the electrochemical process of charge and discharge. In the use of lithium batteries, when the battery overcharge or at higher temperatures, the separator ...
read more
-
The lithium-rich manganese-based (xLi[Li1/3-Mn2/3]O2; (1–x) LiMO2, M is a transition metal 0≤x≤1, and the structure is similar to LiCoO2) has a high discharge specific capacity. It is about twice the actual capacity of the cathode material currently used, and is therefore widely studied for lithium battery materials. In addition, since the material contains a large amount of Mn element, it is more...
read more
-
Lithium ion batteries have the advantages of large capacity, high specific energy, good cycle life and no memory effect. Lithium-ion batteries are developing rapidly, and their capacity, as the most critical performance indicator, has attracted researchers' attention. Correspondingly, lithium battery PACK is continuously developing towards large capacity, fast charging, long life and high safety, ...
read more
-
A good combination can not only improve cell utilization, but also control monomer consistency, which is the basis of achieving good discharge capacity and cycle stability. However, the dispersion degree of ac impedance of single battery capacity will be intensified, which will weaken the cycling performance and available capacity of battery. But how do you achieve good grouping of battery? Quanti...
read more
-
Lithium ion battery is a kind of energy storage device, currently the commonly used lithium ion battery according to the cathode material can be divided into iron phosphate lithium battery, ternary battery and manganese acid lithium battery. Take the lithium iron phosphate battery as an example: when discharging, the iron phosphate in the positive electrode and the lithium ion transferred from the...
read more
-
Electrode Preparation is a key part in the whole battery manufacturing process, the quality of electrode directly affects the next step. The battery slurry preparation is a non - Newtonian high viscosity fluid which is formed by mixing the active materials, binders, solvents and other powders evenly. This slurry requires a certain viscosity, good fluidity and a sufficiently small particle size. So...
read more
-
As the core product of replacing the fuel - powered vehicle, new energy vehicle has been accepted by more and more users. Similarly, as one of the components of new energy vehicles, power battery has a more and more promising market. As a high-tech enterprise in the field of lithium-ion battery and supercapacitor, TOB has always been committed to the development of the fuel cells, TOB New Energy c...
read more
-
The lithium battery electrode is a coating composed of particles. During the preparation of the electrode, a uniform wet slurry is applied to the metal current collector foil, and then the solvent in the dehumidification coating is removed by drying. Battery binder or dispersant as well as conductive agent such as carbon black are often added to the battery electrode slurry. Although the solid con...
read more
-
Before starting, place the prepared button battery assembly parts and materials in the glove box. We can offer a full set of coin cell parts and materials, including coin cell case, coated electrode, cathode and anode materials, electrolyte, coin cell spacer, wave spring, belleville washers, battery separator. 1. Place the spacer and the cathode electrode into the coin cell cathode case one by one...
read more
-
Lithium Chip Metal lithium chip used in the laboratory can provide a far greater source of lithium, Lithium chip shall have less impurities and the size shall be larger than that of the electrode to be measured, and the purity of lithium chip shall not be less than 99.9%. General requirements for lithium chip in the preparation of coin cell: diameter 15 ~ 15.8mm (the corresponding electrode size i...
read more
-
If the surface of the prepared battery electrode is flat, there is no significant particulate matter. In addition, there is no obvious material drop in the baking, room temperature cooling and transfer process, so it can be preliminarily judged that the preparation of pole sheet is qualified. Further comparison can be made on the quality, thickness of the battery electrode, and the dropping of the...
read more
-
Battery Electrode Transfer Roll Coating Machine Coating roller rotation drive slurry, through adjusting the scraper clearance to adjust the amount of slurry transfer, the slurry is transferred to the substrate(copper foil,aluminum foil, etc.) by the rotation of the coating roller, and according to the process requirements, control the coating thickness to meet the weight requirements. At the same ...
read more
-
The function of formation, The internal anode and cathode materials are activated by charging and discharging, and a good SEI film is formed on the surface of the anode. The principle of formation, The formation of lithium cell is the initialization of the battery, which activates the active material of the cell, which is a process of energy conversion. The formation of lithium cell is a complex p...
read more
-
Pouch lithium cell refers to the aluminum laminated film for the outer case packing of the battery. Compared with square aluminum shell battery and cylindrical battery, pouch lithium battery in the occurrence of safety hazards in the first gas expansion, or r release energy from the damage. This makes it not easy to explode and thus more secure. At the same time, a pouch lithium battery of the sam...
read more
-
There are many kinds of cathode materials for lithium ion batteries. According to the difference of cathode materials, they can be divided into LiNiMnCoO2 NMC(NCM) cathode material, LiNiCoAlO2 NCA cathode material, LiFePO4 LFP cathode, LiCoO2 LCO cathode, LiMn2O4 LMO cathode and Li4Ti5O12 LTO material. Ternary lithium battery refers to the lithium battery that uses three transition metal oxides ni...
read more
-
The most widely used battery is still lithium battery, but lithium battery also has some problems that need to be improved. One of the key problems is that the lithium battery cathode produces excess oxygen, which reacts with the electrolyte and causes a thin film to form on the surface of the battery cathode, reducing energy transfer and thus the overall performance of the battery. To solve this ...
read more
中文
français
Deutsch
italiano
español
português
Nederlands
日本語
한국의
subscribe to us 
