-
According to the operation mode, can be divided into:manual winding machine,semi automatic winding machine,automatic winding machine.Lithium battery winding machineand the capacitor winding machine, buyers usually according to classification of origin, mainly divided into: domestic winding machine, winding machine, South Korea Japan winding machine. Battery manufacturers generally small scale will...
read more
-
For lithium ion batteries, the cathode materials that can be used should meet the characteristics of large reversible capacity, high potential and stability, non-toxic and low production cost. At present, lithium iron phosphate is the most common cathode material for lithium ion batteries. However, LiFePO4 has poor electrical conductivity and low lithium ion mobility. If LiFePO4 material is combin...
read more
-
Graphene Oxide is a two-dimensional planar nanomaterial composed of carbon atoms with a hexagonal honeycomb lattice，the c-c bond length is 0.141nm, the theoretical density is about 0.77mg/m2, and the thickness is only about the diameter of a carbon atom. Carbon atoms participate in hybridization in the way of sp2, and electrons can smoothly conduct between layers, so graphene conducts electricity ...
read more
-
The Electrode Coating Machine is the key equipment for the production of lithium battery electrode. Because it directly affects the subsequent rolling operation, and even affects the performance of the entire battery. At present, the mainly lithium battery electrode coating process is: scraper type, roll to roll transfer coating type and a slit extrusion type. General speaking, laboratory equ...
read more
-
The main components of lithium ion battery include cathode, anode, electrolyte, membrane, etc. The storage and release of lithium ion energy is realized in the form of REDOX reaction of electrode materials, and the cathode active material is the most critical core material of lithium ion battery. Professor GOODENOUGH, the father of lithium battery, has made a great contribution...
read more
-
Introduction: Polyvinylidene fluoride binder(PVDF) is currently the most commonly used oil binder in the lithium ion battery industry. It is a non-polar chain polymer binder. It is characterized by strong oxidation resistance, good thermal stability and easy dispersion. N-methylpyrrolidone (NMP) is required as a solvent. This solvent has a high volatilization temperature, has a certain environment...
read more
-
The lithium-air battery is a new type of high-capacity lithium-ion battery developed by the Japan Industrial Technology Research Institute and the Japan Society for the Promotion of Science (JSPS). The battery uses lithium metal as the negative electrode, oxygen in the air as the positive electrode, and the electrodes are separated by a solid electrolyte; the negative electrode uses an&n...
read more
-
The battery separator plays a major role in lithium ion battery conduction lithium ions and isolation between the positive and negative electrode electronic contact. It is an important component to support the battery to complete the electrochemical process of charge and discharge. In the use of lithium batteries, when the battery overcharge or at higher temperatures, the separator ...
read more
-
The lithium-rich manganese-based (xLi[Li1/3-Mn2/3]O2; (1–x) LiMO2, M is a transition metal 0≤x≤1, and the structure is similar to LiCoO2) has a high discharge specific capacity. It is about twice the actual capacity of the cathode material currently used, and is therefore widely studied for lithium battery materials. In addition, since the material contains a large amount of Mn element, it is more...
read more
-
Lithium ion batteries have the advantages of large capacity, high specific energy, good cycle life and no memory effect. Lithium-ion batteries are developing rapidly, and their capacity, as the most critical performance indicator, has attracted researchers' attention. Correspondingly, lithium battery PACK is continuously developing towards large capacity, fast charging, long life and high safety, ...
read more
-
Lithium ion battery is a kind of energy storage device, currently the commonly used lithium ion battery according to the cathode material can be divided into iron phosphate lithium battery, ternary battery and manganese acid lithium battery. Take the lithium iron phosphate battery as an example: when discharging, the iron phosphate in the positive electrode and the lithium ion transferred from the...
read more
-
As the core product of replacing the fuel - powered vehicle, new energy vehicle has been accepted by more and more users. Similarly, as one of the components of new energy vehicles, power battery has a more and more promising market. As a high-tech enterprise in the field of lithium-ion battery and supercapacitor, TOB has always been committed to the development of the fuel cells, TOB New Energy c...
read more
-
Lithium Chip Metal lithium chip used in the laboratory can provide a far greater source of lithium, Lithium chip shall have less impurities and the size shall be larger than that of the electrode to be measured, and the purity of lithium chip shall not be less than 99.9%. General requirements for lithium chip in the preparation of coin cell: diameter 15 ~ 15.8mm (the corresponding electrode size i...
read more
-
There are many kinds of cathode materials for lithium ion batteries. According to the difference of cathode materials, they can be divided into LiNiMnCoO2 NMC(NCM) cathode material, LiNiCoAlO2 NCA cathode material, LiFePO4 LFP cathode, LiCoO2 LCO cathode, LiMn2O4 LMO cathode and Li4Ti5O12 LTO material. Ternary lithium battery refers to the lithium battery that uses three transition metal oxides ni...
read more
-
Graphene anode material has the potential to replace graphite material as a new cathode material for lithium ion batteries due to its unique two-dimensional structure, excellent electron transport capacity and super large specific surface area. The lithium storage mechanism of graphene anode material is similar to that of other carbonaceous materials. During charging, lithium ions come out from th...
read more
-
The most widely used battery is still lithium battery, but lithium battery also has some problems that need to be improved. One of the key problems is that the lithium battery cathode produces excess oxygen, which reacts with the electrolyte and causes a thin film to form on the surface of the battery cathode, reducing energy transfer and thus the overall performance of the battery. To solve this ...
read more
-
Lithium cobalt oxide battery is composed of cobalt oxide cathode and graphite carbon anode. The LCO cathode has layered structure, during discharge, lithium ions move from anode to cathode, with the flow reversing when the battery is charging. Its high specific energy makes lithium cobalt oxide battery a popular choice for mobile phones, laptops and digital cameras. The disadvantages of lithium co...
read more
-
A three-dimensional spinel structure is formed on the architecture of the lithium manganate battery, which improves the flow of ions on the battery electrode, thereby reducing internal resistance and improving current carrying capacity. Another advantage of spinel is its high thermal stability, improved safety, but limited cycle and calendar life. TOB New Energy offers high quanlity lithium mangan...
read more
-
One of the most successful lithium ion systems is the cathode combination of nickel-manganese-Cobalt (NMC). Like lithium manganate, the system can be customised for use as an energy or power battery. For example, the NMC in the 18650 battery under moderate load has a capacity of about 2,800mAh and can provide 4A to 5A discharge currents. The same type of NMC, optimized for a specific power, has a ...
read more
-
Lithium phosphatehas good electrochemical performance and low resistance. This is achieved through nanoscale phosphate cathode materials. The main advantages are high rated current and long cycle life; Good thermal stability, enhanced security and tolerance to abuse. If kept at a high voltage for a long period of time, lithium phosphate is more tolerant to full charging conditions and is less stre...
read more
中文
français
Deutsch
italiano
español
português
Nederlands
日本語
한국의
subscribe to us 
