-
Although high-voltage lithium battery materials are getting more and more attention, these high-voltage anode materials are still unable to achieve good results in practical production and application. The biggest limiting factor is that the electrochemical stability window of the carbonate-based electrolyte is low. When the battery voltage reaches about 4.5(vs.Li/Li+), the electrolyte begins to p...
read more
-
One-Step Pressing, it is rolling only once to achieve the designed thickness and density of the battery electrode. Two-Step Pressing, it is rolling the battery electrode to a certain thickness (such as 90μm) at first time, and achieve the designed thickness (such as 70μm) and desired density through the second time pressing. The main purpose of the rolling press is to control the electrode in the ...
read more
-
Battery Electrode Transfer Roll Coating Machine Coating roller rotation drive slurry, through adjusting the scraper clearance to adjust the amount of slurry transfer, the slurry is transferred to the substrate(copper foil,aluminum foil, etc.) by the rotation of the coating roller, and according to the process requirements, control the coating thickness to meet the weight requirements. At the same ...
read more
-
Graphene anode material has the potential to replace graphite material as a new cathode material for lithium ion batteries due to its unique two-dimensional structure, excellent electron transport capacity and super large specific surface area. The lithium storage mechanism of graphene anode material is similar to that of other carbonaceous materials. During charging, lithium ions come out from th...
read more
-
The anode of lithium battery is composed of anode active materials, conductive agent, battery binder and dispersant. The conventional anode electrode system is a water mixing process (the solvent is deionized water), so the incoming material does not require drying. This process requires: Conductivity of deionized water ≤1us/cm. Workshop temperature ≤40℃, Humidity :≤25%RH. After confirmation of th...
read more
-
The cathode electrode coating is the cathode slurry extrusion coating or spraying on the cathode current collector aluminum foil, the density of one side is 20 to 40 mg/cm2. Coating oven temperature conventional 4-8 sections (or more), each section of baking temperature 95℃ ~ 120℃ according to the actual needs to adjust, to avoid baking cracking transverse cracks and solvent phenomenon, the speed ...
read more
-
(1) Layered metal oxides Layered metal oxides are favored by researchers because of their simple manufacturing method and high specific capacity. Similar to lithium batteries, layered oxide cathode materials are also promising cathode materials for commercial use in sodium ion batteries. (2) Prussian blue Prussian blue frame structure allows sodium ions to be embedded and released quickly, with ex...
read more
-
Prussian Blue Cathode Materials for Aqueous Sodium-ion Batteries: Preparation and Electrochemical Performance Author:LI Yong. Prussian Blue Cathode Materials for Aqueous Sodium-ion Batteries: Preparation and Electrochemical Performance. Journal of Inorganic Materials[J], 2019, 34(4): 365-372 doi:10.15541/jim20180272 TOB New Energy can provide a full set of battery material and batte...
read more
-
Lithium-ion batteries are widely used in various fields due to their high energy density, long cycle life and environmental friendliness. The anode electrode slurry is one of the key components of lithium-ion batteries, which affects the performance and safety of the batteries. Therefore, it is important to understand the preparation process and precautions of the anode electrode slurry. The prepa...
read more
-
Dual-lithium-salt Gel Complex Electrolyte: Preparation and Application in Lithium-metal Battery GUO Yuxiang, HUANG Liqiang, WANG Gang, WANG Hongzhi. Dual-lithium-salt Gel Complex Electrolyte: Preparation and Application in Lithium-metal Battery. Journal of Inorganic Materials, 2023, 38(7): 785-792 DOI:10.15541/jim20220761 Abstract Metallic Li is one of the ideal anodes for high energy de...
read more
-
Na3Zr2Si2PO12 Ceramic Electrolytes for Na-ion Battery: Preparation Using Spray-drying Method and Its Property Author:LI Wenkai, ZHAO Ning, BI Zhijie, GUO Xiangxin. Na3Zr2Si2PO12 Ceramic Electrolytes for Na-ion Battery: Preparation Using Spray-drying Method and Its Property. Journal of Inorganic Materials, 2022, 37(2): 189-196 DOI:10.15541/jim20210486 Abstract Na-ion batteries, ...
read more
-
Recent progress on anode for sulfide-based all-solid-state lithium batteries —— Part 1 Lithium metal anode Author: JIA Linan, DU Yibo, GUO Bangjun, ZHANG Xi 1. School of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai 200241, China 2. Shanghai Yili New Energy Technology Co. , LTD. , Shanghai 201306, China Abstract All-solid-state lithium batteries (ASSLBs) exhibit hi...
read more
-
Continuing from the previous article Recent progress on anode for sulfide-based all-solid-state lithium batteries —— Part 2 other anodes Author: JIA Linan, DU Yibo, GUO Bangjun, ZHANG Xi 1. School of Mechanical Engineering, Shanghai Jiao Tong University, Shanghai 200241, China 2. Shanghai Yili New Energy Technology Co. , LTD. , Shanghai 201306, China Lithium alloy anode Du...
read more
-
Electrochemical Activity of Positive Electrode Material of P2-Nax[Mg0.33Mn0.67]O2 Sodium Ion Battery Author: ZHANG Xiaojun1, LI Jiale1,2, QIU Wujie2,3, YANG Miaosen1, LIU Jianjun2,3,4 1. Jilin Province Sci-Tech Center for Clean Conversion and High-valued Utilization of Biomass, Northeast Electric Power University, Jilin 132012, China 2. State Key Laboratory of High Perform...
read more
-
Author: XIA Qiuying, SUN Shuo, ZAN Feng, XU Jing, XIA Hui School of Materials Science and Engineering, Nanjing University of Science and Technology, Nanjing 210094, China Abstract All-solid-state thin film lithium battery (TFLB) is regarded as the ideal power source for microelectronic devices. However, the relatively low ionic conductivity of amorphous solid-state electrolyte ...
read more
-
F-doped Carbon Coated Nano-Si Anode with High Capacity: Preparation by Gaseous Fluorination and Performance for Lithium Storage Author: SU Nan, QIU Jieshan, WANG Zhiyu. F-doped Carbon Coated Nano-Si Anode with High Capacity: Preparation by Gaseous Fluorination and Performance for Lithium Storage. Journal of Inorganic Materials, 2023, 38(8): 947-953 DOI:10.15541/jim20230009 Abstract ...
read more
-
In recent years, there has been rapid development of sulfide solid electrolytes including Li2S-SiS2, Li2S-B2S3, Li2S-P2S5, Li(10±1)MP2S12(M=Ge, Si, Sn, Al, P), Li6PS5X(X=Cl, Br, I). In particular, the thio-LISICON structure sulfide, represented by Li10GeP2S12 (LGPS), exhibits extremely high room temperature lithium ion conductivity of 12mS/cm exceeding that of liquid electrolytes, which has ...
read more
-
Lithium-ion Battery Anode Material Classification As one of the key materials for lithium-ion batteries, negative electrode materials need to meet multiple conditions. The Li intercalation and deintercalation reaction has a low redox potential to satisfy the high output voltage of lithium-ion batteries. During the process of Li intercalation and deintercalation, the electrode potential changes lit...
read more
-
Areal density(mg/cm2):Areal density refers to the mass per unit area, which in this case is (the mass per unit area ofthe region ignoring the volume). Compacted density(g/cm3):The compacted density indicates the mass contained in a unit volume, which has a lot to do with the properties of the material itself. Thickness:The total thickness of the material and the foil is generally expressed in micr...
read more
-
The inconsistency of energy storage batteries mainly refers to the inconsistency of parameters such as battery capacity, internal resistance, and temperature. Our daily experience is that when two dry batteries are connected in positive and negative directions, the flashlight will light up, and we don’t consider consistency. However, once batteries are used on a large scale in energy storage syste...
read more