-
We have some large factories that we more or less have seen roller press. But surely everyone for roller press is not so understanding. Here I am for everyone detail our company’s flagship product roll press. Roller press and a series of broken classifier as a pre-grinding system with open cement mill roll grinding system consisting, in particular the process of using the system as a new and effic...
read more
-
For lithium ion batteries, the cathode materials that can be used should meet the characteristics of large reversible capacity, high potential and stability, non-toxic and low production cost. At present, lithium iron phosphate is the most common cathode material for lithium ion batteries. However, LiFePO4 has poor electrical conductivity and low lithium ion mobility. If LiFePO4 material is combin...
read more
-
The Electrode Coating Machine is the key equipment for the production of lithium battery electrode. Because it directly affects the subsequent rolling operation, and even affects the performance of the entire battery. At present, the mainly lithium battery electrode coating process is: scraper type, roll to roll transfer coating type and a slit extrusion type. General speaking, laboratory equ...
read more
-
The main components of lithium ion battery include cathode, anode, electrolyte, membrane, etc. The storage and release of lithium ion energy is realized in the form of REDOX reaction of electrode materials, and the cathode active material is the most critical core material of lithium ion battery. Professor GOODENOUGH, the father of lithium battery, has made a great contribution...
read more
-
The lithium-rich manganese-based (xLi[Li1/3-Mn2/3]O2; (1–x) LiMO2, M is a transition metal 0≤x≤1, and the structure is similar to LiCoO2) has a high discharge specific capacity. It is about twice the actual capacity of the cathode material currently used, and is therefore widely studied for lithium battery materials. In addition, since the material contains a large amount of Mn element, it is more...
read more
-
Electrode Preparation is a key part in the whole battery manufacturing process, the quality of electrode directly affects the next step. The battery slurry preparation is a non - Newtonian high viscosity fluid which is formed by mixing the active materials, binders, solvents and other powders evenly. This slurry requires a certain viscosity, good fluidity and a sufficiently small particle size. So...
read more
-
When preparing the electrode of lithium ion battery, aluminum foil is used as the cathode current collector foil, while copper foil is used as the anode current collector foil. If a single smooth foil is used, it is recommended to apply the foil on the rough side to increase the bonding force between the current collector foil and the materials. There is no special requirement for the thickness of...
read more
-
The lithium battery electrode is a coating composed of particles. During the preparation of the electrode, a uniform wet slurry is applied to the metal current collector foil, and then the solvent in the dehumidification coating is removed by drying. Battery binder or dispersant as well as conductive agent such as carbon black are often added to the battery electrode slurry. Although the solid con...
read more
-
After electrode coating, electrode through drying process in oven and the coated electrode becomes loose. If used directly, the cathode material and anode material is easy to fall off and damage after being soaked by electrolyte. The electrode can be pressed by the battery electrode roller machine. The stability, firmness and electrochemical properties of the pressed electrode were improved, and t...
read more
-
If the surface of the prepared battery electrode is flat, there is no significant particulate matter. In addition, there is no obvious material drop in the baking, room temperature cooling and transfer process, so it can be preliminarily judged that the preparation of pole sheet is qualified. Further comparison can be made on the quality, thickness of the battery electrode, and the dropping of the...
read more
-
One-Step Pressing, it is rolling only once to achieve the designed thickness and density of the battery electrode. Two-Step Pressing, it is rolling the battery electrode to a certain thickness (such as 90μm) at first time, and achieve the designed thickness (such as 70μm) and desired density through the second time pressing. The main purpose of the rolling press is to control the electrode in the ...
read more
-
Battery Electrode Transfer Roll Coating Machine Coating roller rotation drive slurry, through adjusting the scraper clearance to adjust the amount of slurry transfer, the slurry is transferred to the substrate(copper foil,aluminum foil, etc.) by the rotation of the coating roller, and according to the process requirements, control the coating thickness to meet the weight requirements. At the same ...
read more
-
There are many kinds of cathode materials for lithium ion batteries. According to the difference of cathode materials, they can be divided into LiNiMnCoO2 NMC(NCM) cathode material, LiNiCoAlO2 NCA cathode material, LiFePO4 LFP cathode, LiCoO2 LCO cathode, LiMn2O4 LMO cathode and Li4Ti5O12 LTO material. Ternary lithium battery refers to the lithium battery that uses three transition metal oxides ni...
read more
-
The most widely used battery is still lithium battery, but lithium battery also has some problems that need to be improved. One of the key problems is that the lithium battery cathode produces excess oxygen, which reacts with the electrolyte and causes a thin film to form on the surface of the battery cathode, reducing energy transfer and thus the overall performance of the battery. To solve this ...
read more
-
Lithium cobalt oxide battery is composed of cobalt oxide cathode and graphite carbon anode. The LCO cathode has layered structure, during discharge, lithium ions move from anode to cathode, with the flow reversing when the battery is charging. Its high specific energy makes lithium cobalt oxide battery a popular choice for mobile phones, laptops and digital cameras. The disadvantages of lithium co...
read more
-
A three-dimensional spinel structure is formed on the architecture of the lithium manganate battery, which improves the flow of ions on the battery electrode, thereby reducing internal resistance and improving current carrying capacity. Another advantage of spinel is its high thermal stability, improved safety, but limited cycle and calendar life. TOB New Energy offers high quanlity lithium mangan...
read more
-
One of the most successful lithium ion systems is the cathode combination of nickel-manganese-Cobalt (NMC). Like lithium manganate, the system can be customised for use as an energy or power battery. For example, the NMC in the 18650 battery under moderate load has a capacity of about 2,800mAh and can provide 4A to 5A discharge currents. The same type of NMC, optimized for a specific power, has a ...
read more
-
Lithium phosphatehas good electrochemical performance and low resistance. This is achieved through nanoscale phosphate cathode materials. The main advantages are high rated current and long cycle life; Good thermal stability, enhanced security and tolerance to abuse. If kept at a high voltage for a long period of time, lithium phosphate is more tolerant to full charging conditions and is less stre...
read more
-
NCA cathode materials batteries have high specific energy, good specific power and long service life similar to NMC cathode battery. But the disadvantages of NCA cathode batteries are low safety and high cost. NCA is a further development of lithium nickel oxide. The addition of aluminum gives the battery greater chemical stability. High energy and power density and good service life make NCA a ca...
read more
-
Currently, achieving high capacity energy density and power density has become the focus of expanding Lithium batteries applications to large-scale energy storage systems. Therefore, high load level and harsh calendering process are needed in the electrode manufacturing process to meet the requirements of high volume energy density of batteries. Although the electrode fabrication process is highly...
read more
中文
français
Deutsch
italiano
español
português
Nederlands
日本語
한국의
subscribe to us 
