-
Areal density（mg/cm2）：Areal density refers to the mass per unit area, which in this case is (the mass per unit area ofthe region ignoring the volume). Compacted density（g/cm3）：The compacted density indicates the mass contained in a unit volume, which has a lot to do with the properties of the material itself. Thickness：The total thickness of the material and the foil is generally expressed in micr...
read more
-
The winding process of lithium-ion batteries is to roll the positive electrode sheet, negative electrode sheet and separator together through the winding needle mechanism of the winding machine. The adjacent positive and negative electrode sheets are isolated by the separator to prevent short circuit. After winding, the jelly roll is fixed with a termination tape to prevent it from spreading, and ...
read more
-
The principle of laser cleaning is to utilize the characteristics of laser beam with large energy density, controllable direction and strong convergence ability. The laser interacts with contaminants such as oil stains, rust spots, dust residue, coatings, oxide layers or film layers attached to the workpiece base, and is separated from the workpiece base in the form of instantaneous thermal expans...
read more
-
This article analyzes the causes of zero voltage. Focused on the phenomenon of zero voltage in the battery caused by electrode burrs. By identifying the cause of the short circuit, we aim to precisely resolve the problem and better understand the importance of controlling electrode burrs during production. Experiment 1. Battery preparation This experiment uses lithium nickel cobalt manganate mater...
read more
-
Lithium-ion Battery Anode Material Classification As one of the key materials for lithium-ion batteries, negative electrode materials need to meet multiple conditions. The Li intercalation and deintercalation reaction has a low redox potential to satisfy the high output voltage of lithium-ion batteries. During the process of Li intercalation and deintercalation, the electrode potential changes lit...
read more
-
Whether prismatic cells or cylindrical cells, welding is one of the important processes in battery production. In the lithium battery production line, the production section of the welding process is mainly concentrated in the cells assembly and PACK line section, see the figure below: Brief description of welding process details 1. Safety vent welding The safety vent, also known as the pressure r...
read more
-
Why are all-solid-state batteries an industry trend? High security: The safety issues of liquid batteries have always been criticized. The electrolyte is easily flammable under high temperature or severe impact. Under high current, lithium dendrites will also appear to pierce the separator and cause short circuit. Sometimes the electrolyte may undergo side reactions or decompose at high temperatur...
read more
-
What is calendering： Calendering of battery electrodes is an important step in the production process of lithium-ion batteries, and its purpose is to obtain electrodes that meet design requirements. Calendering is a necessary process. After the electrode coating and drying, the peeling strength between the active material and the current collector foil is low. At this time, it needs to be calender...
read more
-
Among the three shell types of cylindrical cell, pouch cell, and prismatic cell, prismatic cell has the highest versatility and market share. But if you want to dismantle the battery to study the internal process design, it is required to ensure safety without short circuiting and without affecting the internal structure. How should you disassemble it? 1.Purpose Guide the disassembly of single pri...
read more
-
In recent years, there has been rapid development of sulfide solid electrolytes including Li2S-SiS2, Li2S-B2S3, Li2S-P2S5, Li(10±1)MP2S12(M=Ge, Si, Sn, Al, P), Li6PS5X(X=Cl, Br, I). In particular, the thio-LISICON structure sulfide, represented by Li10GeP2S12 (LGPS), exhibits extremely high room temperature lithium ion conductivity of 12mS/cm exceeding that of liquid electrolytes, which has ...
read more
中文
français
Deutsch
italiano
español
português
Nederlands
日本語
한국의
subscribe to us 
