-
Battery Electrode Transfer Roll Coating Machine Coating roller rotation drive slurry, through adjusting the scraper clearance to adjust the amount of slurry transfer, the slurry is transferred to the substrate(copper foil,aluminum foil, etc.) by the rotation of the coating roller, and according to the process requirements, control the coating thickness to meet the weight requirements. At the same ...
read more
-
The function of formation, The internal anode and cathode materials are activated by charging and discharging, and a good SEI film is formed on the surface of the anode. The principle of formation, The formation of lithium cell is the initialization of the battery, which activates the active material of the cell, which is a process of energy conversion. The formation of lithium cell is a complex p...
read more
-
Pouch lithium cell refers to the aluminum laminated film for the outer case packing of the battery. Compared with square aluminum shell battery and cylindrical battery, pouch lithium battery in the occurrence of safety hazards in the first gas expansion, or r release energy from the damage. This makes it not easy to explode and thus more secure. At the same time, a pouch lithium battery of the sam...
read more
-
The process of 18650 lithium battery pack is mainly based on the structure of pack battery, and most of the 18650 lithium battery pack process features are similar. The distinctive features of the 18650 lithium battery PACK process are multiple parallel and multiple series. The greatest feature of the 18650 lithium battery Pack is its flexible combination, most of which can be semi-automated. TOB ...
read more
-
There are many kinds of cathode materials for lithium ion batteries. According to the difference of cathode materials, they can be divided into LiNiMnCoO2 NMC(NCM) cathode material, LiNiCoAlO2 NCA cathode material, LiFePO4 LFP cathode, LiCoO2 LCO cathode, LiMn2O4 LMO cathode and Li4Ti5O12 LTO material. Ternary lithium battery refers to the lithium battery that uses three transition metal oxides ni...
read more
-
Graphene anode material has the potential to replace graphite material as a new cathode material for lithium ion batteries due to its unique two-dimensional structure, excellent electron transport capacity and super large specific surface area. The lithium storage mechanism of graphene anode material is similar to that of other carbonaceous materials. During charging, lithium ions come out from th...
read more
-
The most widely used battery is still lithium battery, but lithium battery also has some problems that need to be improved. One of the key problems is that the lithium battery cathode produces excess oxygen, which reacts with the electrolyte and causes a thin film to form on the surface of the battery cathode, reducing energy transfer and thus the overall performance of the battery. To solve this ...
read more
-
Lithium cobalt oxide battery is composed of cobalt oxide cathode and graphite carbon anode. The LCO cathode has layered structure, during discharge, lithium ions move from anode to cathode, with the flow reversing when the battery is charging. Its high specific energy makes lithium cobalt oxide battery a popular choice for mobile phones, laptops and digital cameras. The disadvantages of lithium co...
read more
-
A three-dimensional spinel structure is formed on the architecture of the lithium manganate battery, which improves the flow of ions on the battery electrode, thereby reducing internal resistance and improving current carrying capacity. Another advantage of spinel is its high thermal stability, improved safety, but limited cycle and calendar life. TOB New Energy offers high quanlity lithium mangan...
read more
-
One of the most successful lithium ion systems is the cathode combination of nickel-manganese-Cobalt (NMC). Like lithium manganate, the system can be customised for use as an energy or power battery. For example, the NMC in the 18650 battery under moderate load has a capacity of about 2,800mAh and can provide 4A to 5A discharge currents. The same type of NMC, optimized for a specific power, has a ...
read more
-
Lithium phosphatehas good electrochemical performance and low resistance. This is achieved through nanoscale phosphate cathode materials. The main advantages are high rated current and long cycle life; Good thermal stability, enhanced security and tolerance to abuse. If kept at a high voltage for a long period of time, lithium phosphate is more tolerant to full charging conditions and is less stre...
read more
-
NCA cathode materials batteries have high specific energy, good specific power and long service life similar to NMC cathode battery. But the disadvantages of NCA cathode batteries are low safety and high cost. NCA is a further development of lithium nickel oxide. The addition of aluminum gives the battery greater chemical stability. High energy and power density and good service life make NCA a ca...
read more
-
Currently, achieving high capacity energy density and power density has become the focus of expanding Lithium batteries applications to large-scale energy storage systems. Therefore, high load level and harsh calendering process are needed in the electrode manufacturing process to meet the requirements of high volume energy density of batteries. Although the electrode fabrication process is highly...
read more
-
The first is to confirm and bake the battery material. Generally, the battery conductive agent needs to be baked at 120℃ for 8 hours. The PVDF powder should be baked at 80℃ for 8 hours. The cathode active material (LFP, NCM, etc.) depends on the state and process of incoming material whether it needs to be baked and dried. After drying, (wet process) Mixing the PVDF powder and NMP solvent to make ...
read more
-
The anode of lithium battery is composed of anode active materials, conductive agent, battery binder and dispersant. The conventional anode electrode system is a water mixing process (the solvent is deionized water), so the incoming material does not require drying. This process requires: Conductivity of deionized water ≤1us/cm. Workshop temperature ≤40℃, Humidity :≤25%RH. After confirmation of th...
read more
-
The cathode electrode coating is the cathode slurry extrusion coating or spraying on the cathode current collector aluminum foil, the density of one side is 20 to 40 mg/cm2. Coating oven temperature conventional 4-8 sections (or more), each section of baking temperature 95℃ ~ 120℃ according to the actual needs to adjust, to avoid baking cracking transverse cracks and solvent phenomenon, the speed ...
read more
-
Drying the battery cathode electrode after battery coating process, it is necessary to roll the coated battery electrode foil during the process time. The electrode rolling process is to compacting the coated electrode, at present there are hot pressing and cold pressing two processes of battery electrode rolling press. Battery electrode hot press compaction rate is higher than cold press, and the...
read more
-
After the slitting process, the cathode and anode electrode piece should be dried (cathode 120℃, anode 105-110℃). Then is the battery tab welding and high temperature adhesive taping process. The length of the battery tabs and the shaping width need to be taken into account. Take the 18650 battery as an example, The design of the battery cathode tabs exposure mainly takes into account the reasonab...
read more
-
Battery electrode winding is the separator, cathode sheet, anode sheet through the battery electrode winding machine into a single battery cells. TOB New Energy can provide the battery winding machine for 18650 lithium-ion cylindrical cell precision winding for 18650 production line. The principle of battery winding is to use the anode to cover the cathode, and then through the battery separator t...
read more
-
Hi-pot test voltage of 200 ~ 500V is required before the battery cell is put into the battery stainless steel case(Test for high voltage short circuit) and vacuuming processing(Control dust further before loading the battery cells). We can provide the most professional lithium battery cells short circuit tester. Moisture, burr and dust are the three control points of lithium battery manufacturing,...
read more
中文
français
Deutsch
italiano
español
português
Nederlands
日本語
한국의
subscribe to us 
