-
For lithium ion batteries, the cathode materials that can be used should meet the characteristics of large reversible capacity, high potential and stability, non-toxic and low production cost. At present, lithium iron phosphate is the most common cathode material for lithium ion batteries. However, LiFePO4 has poor electrical conductivity and low lithium ion mobility. If LiFePO4 material is combin...
read more
-
Graphene Oxide is a two-dimensional planar nanomaterial composed of carbon atoms with a hexagonal honeycomb lattice，the c-c bond length is 0.141nm, the theoretical density is about 0.77mg/m2, and the thickness is only about the diameter of a carbon atom. Carbon atoms participate in hybridization in the way of sp2, and electrons can smoothly conduct between layers, so graphene conducts electricity ...
read more
-
The main components of lithium ion battery include cathode, anode, electrolyte, membrane, etc. The storage and release of lithium ion energy is realized in the form of REDOX reaction of electrode materials, and the cathode active material is the most critical core material of lithium ion battery. Professor GOODENOUGH, the father of lithium battery, has made a great contribution...
read more
-
Introduction: Polyvinylidene fluoride binder(PVDF) is currently the most commonly used oil binder in the lithium ion battery industry. It is a non-polar chain polymer binder. It is characterized by strong oxidation resistance, good thermal stability and easy dispersion. N-methylpyrrolidone (NMP) is required as a solvent. This solvent has a high volatilization temperature, has a certain environment...
read more
-
The lithium-rich manganese-based (xLi[Li1/3-Mn2/3]O2; (1–x) LiMO2, M is a transition metal 0≤x≤1, and the structure is similar to LiCoO2) has a high discharge specific capacity. It is about twice the actual capacity of the cathode material currently used, and is therefore widely studied for lithium battery materials. In addition, since the material contains a large amount of Mn element, it is more...
read more
-
As the core product of replacing the fuel - powered vehicle, new energy vehicle has been accepted by more and more users. Similarly, as one of the components of new energy vehicles, power battery has a more and more promising market. As a high-tech enterprise in the field of lithium-ion battery and supercapacitor, TOB has always been committed to the development of the fuel cells, TOB New Energy c...
read more
-
There are many kinds of cathode materials for lithium ion batteries. According to the difference of cathode materials, they can be divided into LiNiMnCoO2 NMC(NCM) cathode material, LiNiCoAlO2 NCA cathode material, LiFePO4 LFP cathode, LiCoO2 LCO cathode, LiMn2O4 LMO cathode and Li4Ti5O12 LTO material. Ternary lithium battery refers to the lithium battery that uses three transition metal oxides ni...
read more
-
Graphene anode material has the potential to replace graphite material as a new cathode material for lithium ion batteries due to its unique two-dimensional structure, excellent electron transport capacity and super large specific surface area. The lithium storage mechanism of graphene anode material is similar to that of other carbonaceous materials. During charging, lithium ions come out from th...
read more
-
The most widely used battery is still lithium battery, but lithium battery also has some problems that need to be improved. One of the key problems is that the lithium battery cathode produces excess oxygen, which reacts with the electrolyte and causes a thin film to form on the surface of the battery cathode, reducing energy transfer and thus the overall performance of the battery. To solve this ...
read more
-
Lithium cobalt oxide battery is composed of cobalt oxide cathode and graphite carbon anode. The LCO cathode has layered structure, during discharge, lithium ions move from anode to cathode, with the flow reversing when the battery is charging. Its high specific energy makes lithium cobalt oxide battery a popular choice for mobile phones, laptops and digital cameras. The disadvantages of lithium co...
read more
-
A three-dimensional spinel structure is formed on the architecture of the lithium manganate battery, which improves the flow of ions on the battery electrode, thereby reducing internal resistance and improving current carrying capacity. Another advantage of spinel is its high thermal stability, improved safety, but limited cycle and calendar life. TOB New Energy offers high quanlity lithium mangan...
read more
-
One of the most successful lithium ion systems is the cathode combination of nickel-manganese-Cobalt (NMC). Like lithium manganate, the system can be customised for use as an energy or power battery. For example, the NMC in the 18650 battery under moderate load has a capacity of about 2,800mAh and can provide 4A to 5A discharge currents. The same type of NMC, optimized for a specific power, has a ...
read more
-
Lithium phosphatehas good electrochemical performance and low resistance. This is achieved through nanoscale phosphate cathode materials. The main advantages are high rated current and long cycle life; Good thermal stability, enhanced security and tolerance to abuse. If kept at a high voltage for a long period of time, lithium phosphate is more tolerant to full charging conditions and is less stre...
read more
-
NCA cathode materials batteries have high specific energy, good specific power and long service life similar to NMC cathode battery. But the disadvantages of NCA cathode batteries are low safety and high cost. NCA is a further development of lithium nickel oxide. The addition of aluminum gives the battery greater chemical stability. High energy and power density and good service life make NCA a ca...
read more
-
Currently, achieving high capacity energy density and power density has become the focus of expanding Lithium batteries applications to large-scale energy storage systems. Therefore, high load level and harsh calendering process are needed in the electrode manufacturing process to meet the requirements of high volume energy density of batteries. Although the electrode fabrication process is highly...
read more
-
The first is to confirm and bake the battery material. Generally, the battery conductive agent needs to be baked at 120℃ for 8 hours. The PVDF powder should be baked at 80℃ for 8 hours. The cathode active material (LFP, NCM, etc.) depends on the state and process of incoming material whether it needs to be baked and dried. After drying, (wet process) Mixing the PVDF powder and NMP solvent to make ...
read more
-
The anode of lithium battery is composed of anode active materials, conductive agent, battery binder and dispersant. The conventional anode electrode system is a water mixing process (the solvent is deionized water), so the incoming material does not require drying. This process requires: Conductivity of deionized water ≤1us/cm. Workshop temperature ≤40℃, Humidity :≤25%RH. After confirmation of th...
read more
-
The cathode electrode coating is the cathode slurry extrusion coating or spraying on the cathode current collector aluminum foil, the density of one side is 20 to 40 mg/cm2. Coating oven temperature conventional 4-8 sections (or more), each section of baking temperature 95℃ ~ 120℃ according to the actual needs to adjust, to avoid baking cracking transverse cracks and solvent phenomenon, the speed ...
read more
-
The packaging method of lithium battery depends on the shell material it uses. In general, only lithium pouch batteries will use aluminum laminate film and heat sealing. The metal cans batteries are usually sealed by laser welding. Aluminum laminate film generally has three layers, respectively nylon layer, Al layer, PP layer. Nylon layer is to ensure the appearance of aluminum laminate film,...
read more
-
The theoretical basis and battery structure of sodium ion battery (Na-ion batteries) and lithium ion battery are very similar. Liquid sodium-ion batteries (like solid-state lithium-ion batteries, are also being investigated) are composed of positive electrode, negative electrode, current collector, electrolyte, and battery separator. Among them, electrolyte and separator basically follow the...
read more
中文
français
Deutsch
italiano
español
português
Nederlands
日本語
한국의
subscribe to us 
