welcome to XIAMEN TOB NEW ENERGY TECHNOLOGY Co., LTD..
  • English
  • Russian
  • f
  • i
  • y
  • t
  • p
battery machine and materials solution
Products

Hot Products


vacuum dryer oven
加载中...

Automatic Vacuum Oven For Lithium Battery

Three layers automatic vacuum oven for lithium battery material and electrode sheet drying.
  • Brand:

    TOB NEW ENERGY
  • item no.:

    TOB-SBVO-03AP
  • order(moq):

    1
  • Payment:

    L/C, T/T
  • product origin:

    China
  • shipping port:

    XIAMEN
  • Lead Time:

    30
Product Detail

Three Layers Automatic Vacuum Oven For Lithium Battery Material And Electrode Sheet Drying



SPECIFICATIONS


The TOB-SBVO-03AP Vacuum oven is specially designed for lithium battery industry production process of vacuum drying equipment, the temperature, vacuum degree, the size of the studio and the barrier height is maximally meet the needs of the lithium battery industry.

This vacuum oven is with Vacuum, pressure, pneumatic automatic programmable control, it is mainly used for Lithium battery materials and electrode sheet vacuum baking for Battery production line.


Working principle

Each machine can work continuously in cycle; Basic process: Open the door to put the battery or pole into the oven, and then set the heating time, vacuum time, nitrogen time system will automatically complete the heating and periodic air exchange according to the set time parameters, to complete the baking process.


Configuration

  • Inner cavity: 3.0mm stainless steel, reinforcement for iron square material processing.
  • Frame: made of 1.5mm high-quality cold-rolled board, composed of two layers of insulation, cotton for aluminum silicate, aluminum foil cotton, sound insulation cotton three kinds of layered production.
  • Hot air system: Each layer is composed of fan, heating box, air duct, air duct, etc., to achieve more consistent temperature.
  • Control system: composed of PLC, touch screen, pressure sensor, high vacuum baffle valve, solid state relay, temperature controller, solenoid valve group, etc.
  • Hardware: including door, back cover, vacuum tube and other stamping parts.


Machine characteristics

  • Door opening mode: single door; Elastic double glass door, three layers of pressure detection, over pressure protection.
  • Inner liner sealing ring: silicone rubber O-type sealing ring made of mold casting, high temperature resistance and corrosion resistance.
  • Principle: surround hot air external circulation. Double-layer insulation insulation, the external temperature is not higher than room temperature +20 degrees.
  • Heating structure: The use of O-type external circulation air, the left side of the air, the right side of the suction, to achieve temperature consistency.
  • High vacuum pneumatic flapper valve, isolated three-layer separate control.
  • Touch screen display, automatic cycle automatic control, complete the last step back to vacuum pressure holding; Digital display safe temperature.
  • Equipped with multi-point over temperature protection temperature control device, can effectively prevent temperature control safety problems such as uncontrolled temperature, improve the accuracy of over temperature protection.
  • The control screen adopts touch screen centralized operation, easy operation and reliable control. The program controller adopts PLC control, the work is stable and reliable.
  • The three-layer oven is controlled separately, you can set the total baking time, cycle time, vacuum time, drying time, after parameter setting, you can press the automatic button to enter the automatic baking program, when the time reaches the baking time, it will automatically shut down, if the temperature exceeds the safe temperature value, it will automatically send an alarm and the red indicator will light up, and automatically stop heating. And display alarm information on the display screen.
  • Fill the box with dry gas to any set value between -0.1Mpa and -0.02Mpa to automatically stop filling.
  • In normal operation, fault warning and fault causes can be described on the screen.
  • Vacuum tube has anti-corrosion.
Model TOB-SBVO-03AP Automatic Vacuum Oven For Lithium Battery
Heating principle External circulation hot air heating
Source voltage AC380V, 50HZ18KW
Gas source Dry air 0.1-0.2Mpa/vacuum -0.98- -0.1Mpa/compressed air 0.4-0.4 Mpa
Temperature RT-150℃
Vacuum degree When it is pumped between -0.1 and 0.098Mpa, the digital display can maintain pressure≥95% under normal temperature and pressure for 24H
Display error The set value and the apparent value after stability are ≤±1℃
Insulation performance The outer wall temperature does not exceed 45 degrees (except glass doors)
Temperature uniformity Each point in the inner cavity 50MM from the wall: ≤±3.5℃ at normal pressure
Thermotropism ≤20℃(within 100 degrees of adjacent layer heating, only 20 degrees higher than room temperature)
Response speed Room temperature to 85 degrees≤30 minutes to reach the set value, no-load core temperature stability time 90-120 minutes
Positions of vacuuming and nitrogen charging and inter faces specifications The interface is located at the rear of the device; The vacuum interface is DN20, and the air filling interface is¢12mm
Working chamber dimension(H*W*D) 350*850*800mm*3layers
Equipment size: 1250*1150*1990 mm (L*D*H)
Equipment colour (Paint treatment) Grey white or Customized


Product Display


New version



Automatic Vacuum Oven

Automatic Vacuum Oven


Old version


Vacuum Oven


Vacuum Oven

Vacuum Oven


 Email: tob.amy@tobmachine.com

 Skype: amywangbest86

 Whatsapp/Phone number: +86 181 2071 5609

Send a Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

our works
related products
oven vacuum 
DZF-6050 Vacuum Drying Oven
The DZF-6050 Vacuum Drying Oven Is mainly used For scientific research units, specialty universities, laboratories, industrial mining enterprises etc and production field for materials drying and heat treatment under the vacuum state.
Lab Vacuum Oven
DZF-6050 Vacuum Lab Oven With Optional Vacuum Pump
The DZF-6050 (1) Vacuum Lab Oven Is mainly used For scientific research units, specialty universities, laboratories, industrial mining enterprises etc and production field for materials drying and heat treatment under the vacuum state.
Vacuum Oven
DZF 6020 Vacuum Drying Oven
The DZF 6020 vacuum drying oven is a laboratory vacuum oven mainly used for scientific research units, universities, laboratories, industrial mining enterprises etc and production field for materials drying and heating treatment under the vacuum state. In battery sector, It is mainly used for lithium ion battery materials, electrode sheet and battery cells vacuum drying.
Vacuum Oven
Vacuum Drying Oven for Lithium-ion Battery Research
In battery sector, this TOB-DZF-6020 lab vacuum drying oven is mainly used for lithium ion battery materials, electrode sheet and battery cells vacuum drying.
Vacuum Degassing Oven
200L Vacuum Degassing Oven
TOB-DZF-6210 vacuum degassing oven for lithium battery field mainly used for lithium battery materials, electrode and battery core vacuum drying for production line.
Vacuum Oven
Manual Vacuum Oven For Lithium Battery
Manual Vacuum Oven For Lithium Battery
vacuum ovens for drying
150℃ Single Layer Vacuum Oven For Battery
150℃ Single Layer Vacuum Oven For Battery
round oven
150℃ Double Drum Round Vacuum Oven
150℃ Double Drum Round Vacuum Oven

leave a message

    If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

Home

Products

Company

top