-
In the structure of lithium-ion battery cells, the battery tab is the metal conductor that leads from the cathode and anode electrodes of the cell, and the complete battery tab is mainly composed of high temperature insulating adhesive and metal conductive substrate. High-temperature insulating adhesive is the insulating part on the battery tabs, for pouch cell, its role is to prevent the short ci...
read more
-
Vacuum drying is to place the materials to be dried in a closed space, and use vacuum equipment to lower the air pressure in the closed space to an atmospheric pressure, while continuously heating the materials, so that the water molecules in the materials gradually diffuse to the surface of the materials due to the effect of pressure difference and concentration difference, and after the material...
read more
-
Take the laboratory scale battery caps welding machine as an example, Put the battery caps and battery spot welder in the glove box in advance, place the battery caps on the mold of the battery spot welder, hold the battery cells on the other hand, align the cathode battery tabs of the battery cell with the caps, after confirming the spot welding position is correct, depress the foot pedal. After ...
read more
-
After the battery cells drying process, the battery cell will be tested for moisture and meet the standard before proceeding to the next step of battery electrolyte filling process（cylindrical cell）. Put the roasted battery cell into the vacuum glove box quickly, weigh it and record the weight, place the injection cup on the upper side of the battery and add the electrolyte into the cup. If not su...
read more
-
After the battery cells of the cylindrical battery passes through the rolling groove by battery grooving machine, the next step is very important: drying the battery cells. Battery cell in the production process will bring a certain amount of water, if not timely removal of water, control it within the standard value range, which will seriously affect the battery performance and safety performance...
read more
-
Insert the welding needle (usually made of copper or alloy) into the middle hole of the rolled battery cells. The specifications of commonly used welding needles are Φ2.5*1.6mm,It is qualified to reach welding strength of anode electrode tab ≥12N, low strength can lead to the unstable welding and larger internal resistance. If the welding strength is too high, it is easy to destroy the nickel laye...
read more
-
Hi-pot test voltage of 200 ~ 500V is required before the battery cell is put into the battery stainless steel case(Test for high voltage short circuit) and vacuuming processing(Control dust further before loading the battery cells). We can provide the most professional lithium battery cells short circuit tester. Moisture, burr and dust are the three control points of lithium battery manufacturing,...
read more
-
Battery electrode winding is the separator, cathode sheet, anode sheet through the battery electrode winding machine into a single battery cells. TOB New Energy can provide the battery winding machine for 18650 lithium-ion cylindrical cell precision winding for 18650 production line. The principle of battery winding is to use the anode to cover the cathode, and then through the battery separator t...
read more
-
After the slitting process, the cathode and anode electrode piece should be dried (cathode 120℃, anode 105-110℃). Then is the battery tab welding and high temperature adhesive taping process. The length of the battery tabs and the shaping width need to be taken into account. Take the 18650 battery as an example, The design of the battery cathode tabs exposure mainly takes into account the reasonab...
read more
中文
français
Deutsch
italiano
español
português
Nederlands
日本語
한국의
subscribe to us 
