Brand:
TOB NEW ENERGYitem no.:
TOB-XFZH05order(moq):
1setPayment:
L/C,T/Tproduct origin:
Chinashipping port:
Xiamen5 Litre Lab Planetary Vacuum Mixer For Solid State Battery Slurry Mixing
SPECIFICATIONS
Application：
This TOB-XFZH05 mixing machine is a planetary vacuum mixer with 5 liter capacity. It is mainly used for solid state battery, sodium-ion battery and lithium ion battery slurry mixing.
Main parameters：
| Model | TOB-XFZH05 |
| Lower Barrel Parts | |
| Design total volume | 8L |
| Elective volume | 2.7-5L |
| Container inner diameter | 240mm |
| Container inside depth | 180mm |
| Container material | The parts in connect with materials is 304 stainless steel |
| Tempering jacket form | The bottom and the barrel jacket can input water for cooling, heat preservation and heating |
| Tempering jacket port | G3/4"，with quick opening movable joint， |
| jacket withstand pressure≤0.4MPa | |
| Tempering jacket circulation system | prepared by customer， |
| jacket water inlet temperature≤8℃， | |
| cooling water flow＞3.5L/min | |
| Discharge materials form | bottom of a G1-1/2" three-piece discharge ball valve, equipped with 2 "standard ISO quick connect clamp connector |
| Design environment temperature | -10～+120°C |
| Move mode | Casters move |
| Mixing Parts | |
| Working frequency | 5-50hz |
| Mixing power | 1.5kw |
| Mixing blade speed | 10-98rpm |
| Planetary box rotate speed | 5-50rpm |
| Mixing blade diameter | 124mm |
| Mixing blade model | Variable cross-section spiral twist type, 90 ° helix |
| Mixing blade material | 304 stainless steel |
| Mixing blade line speed | 0.06-0.6m/s |
| Mixing blade number | 2pcs |
| Dispersing Parts | |
| Working frequency | 5-50hz |
| Dispersing power | 2.2kw |
| Dispersing rotate speed | 610-6100rpm |
| Dispersing plate diameter | 70mm |
| Dispersing model | Serrated |
| Dispersing plate material | 304 stainless steel |
| Dispersing line speed | 2.2-22m/s |
| Dispersing number | 1pcs |
| Dispersing shaft number | 1pcs |
| Scratch the Wall Parts | Scratch wall bracket material：304 stainless steel |
| Scratch wall material：Teflon | |
| Scratch wall rotate speed：Consistent with planetary box rotate speed | |
| Removable or not：Removable design (Need to remove when scraping the wall on high viscosity process) | |
| Base and Lifting Parts | Parts materials：High rigidity structural carbon steel |
| Lifting way：electric | |
| Lifting guide：High-precision linear guide | |
| Lifting itinerary：≤290mm | |
| Upper Barrel Parts | Upper barrel material：304 stainless steel |
| Power feed port：quick opening interface DN40 1pcs | |
| Liquid feed port：ISO standard 1/2" quick interface 1pcs | |
| Mirror port：DN50 tempered glass sight glass 1pcs | |
| Vacuumize port：G1/2 " 1pcs | |
| Exhaust port：together with vacuumize port | |
| Digital vacuum gauge port：M14×1.5 Internal thread metric tooth interface 1pcs | |
| Control System | Electrical cabinet：Used to install low-voltage electrical components such as inverter |
| Manual operation panel：For placement buttons, knobs, gauges etc | |
| Power supply：AC 3×380V±5﹪，50Hz | |
| Control mode：electronic control | |
| Power control and speed adjustment mode: Inverter start and control | |
| Cooling mode：Air-cooled (wind cooling) | |
| Operation mode：Touch screen | |
| Digital temperature display gauge：material temperature | |
| Emergency stop button：1pcs | |
| Alarm system：Over-temperature alarm, over-temperature alarm shutdown, alarm shutdown | |
| Speed display: Touch screen shows the speed | |
| Power instructions: 1pcs | |
| Safety Chain System | Emergency stop: press the emergency stop switch, the device immediately stop, and can not do anything |
| Start low-speed mixing: can lift the barrel and turning at the same time | |
| High-speed dispersion: barrel up in place before turning | |
| Safe lock in operation: When the machine is running, the mixing barrel can not be lowered, can not open the mixing barrel. | |
| Prevent vacuum tube backflow: special vacuum buffer tank design, can effectively prevent the vacuum pump oil back to the mixing drum phenomenon | |
| Stop running fault: Inverter comes with overload, overcurrent, overvoltage, leakage, lack of equal protection | |
| Mixing barrel lift: stirring barrel in place to rise | |
| Mixing barrel did not return to normal pressure can not be dropped. | |
| After mixing barrel rises in place and high-speed dispersion, then can be started. | |
| After mixing barrel rises in place, with locking protection system, to prevent while the mixing barrel rises to high place abnormal fall. | |
| Dry mixing stage, while the barrel rising, the stirring paddle need to rotate at the same time. | |
| Other description | Temperature probe：Pt100 |
| Temperature measurement: Located of the barrel wall to detection of internal material temperature | |
| Transmission parts bearings：High-speed components for imported bearings, low-speed components for domestic bearings | |
| Oil seal：Domestic brands，O-ring for Static seal，dynamic seal using mechanical seals or skeleton oil seal | |
| Grease：Domestic brands | |
| Mechanical seal lubricants：Imported brand | |
| Petrol cylinder：Domestic brands | |
| Petrol station：Domestic brands | |
| Valve：Domestic brands | |
| acuum design quantity demand：vacuum system prepared by customer own, air exhaust volume 2L/S（2X-2） | |
| Vacuum hold：-0.098Mpa，holding pressure for 24 hours＞-0.085Mpa，do not leak to the barrel | |
| Total host power：＞4kw | |
| Total weight: about 700kg | |
| Dimensions：L1463mm×W610mm×H1770mm | |
| Appearance color：off-white | |
| Ground bearing：900kg/㎡ | |
Features and Advantages
|
Without scraper. Eliminate the blind angle on the back of the scraper, promote the full mixing and dispersing of more materials. At the same time, it reduces the workload caused by scraping (the scraper is standard and can be removed). |
 |
|
Easy to clean. The distance between the planetary box and the bottom surface of the upper bucket is reduced, which increases the gap between parts and facilitates cleaning. |
 |
|
Machine with high rigidity. The rigidity is twice that of the same type of equipment, which can meet the mixing of higher viscosity materials. |
 |
|
With dynamic temperature measurement function. The accuracy of temperature measurement is higher, and the temperature measurement line is introduced through the low-speed shaft, which improves the service life of the temperature measurement joint. |
 |
|
Variable cross section kneading. The kneading process of highly viscous materials is realized in one go, and the efficiency is increased by 30%~40%. |
 |
|
Dispersion fast. The single dispersing disc achieves 137% of the dispersing efficiency of the old 5L double dispersing disc, greatly reducing splashing. |
 |
|
5L battery slurry mixer for cylindrical cell project in IIT
|
5L and 30L battery mixers used for Russian pouch cell and cylindrical cell projects
|
Get More Information About the Sodium-ion Battery Solution
Previous:
Solid State Battery Case Aluminum Laminated Film Forming MachineNext:
Lab De-ironing filter For Solid State Battery SlurryIf you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.
subscribe to us 
Copyright © 2015-2024 XIAMEN TOB NEW ENERGY TECHNOLOGY Co., LTD..All Rights Reserved.
中文
français
Deutsch
italiano
español
português
Nederlands
日本語
한국의
