Dry Electrode Film Rolling Press Machine

Dry Electrode Film Rolling Press Machine

SPECIFICATIONS (Contact us for details)

This roller press machine is specially used to rolling the dry electrode film. After the dry electrode powder materials were rolled into film, according to the requirements of the battery production process, it is necessary to rolling press the dry electrode film to meet the predetermined thickness.

Device Installation Requirements 

1. Power supply: 3PH 380V, 50HZ, voltage fluctuation range: +8% ~ -8%; Total power supply 30KW plus 10% safety factor.

2. Compressed air: after drying, filtering and pressure stabilization, the outlet pressure is greater than 0.6 ~ 0.8mpa; The trachea was φ8.

3. Ambient temperature:≤28℃.

4. Relative humidity: RH≤85%.

5. Ensure that the air on site is dry and free from acid and alkali corrosion.

6. Host installation foundation: the cement thickness of the foundation in the main load-bearing area shall not be less than 20cm, and the other areas shall not be less than 10cm; The main part of the equipment (battery pole mill) shall be installed on a concrete foundation with a ground bearing capacity of not less than 1.5 T /m2.

PRODUCT DISPLAY

Dry electrode solution, project design, equipment and materials supply.

  Email : tob.amy@tobmachine.com

  Whatsapp/Phone number :+86 181 2071 5609