Lab Oven

We have some large factories that we more or less have seen roller press. But surely everyone for roller press is not so understanding. Here I am for everyone detail our company’s flagship product roll press. Roller press and a series of broken classifier as a pre-grinding system with open cement mill roll grinding system consisting, in particular the process of using the system as a new and effic...

The vacuum drying oven is designed for drying heat sensitive, easily decomposable and easily oxidizable materials. It can be filled with an inert gas, which can make some ingredients with complex ingredients dry quickly. Scope of application: High Temperature Vacuum drying ovens are widely used in research and application fields such as biochemistry, chemical pharmacy, medical and health, agricult...

After electrode coating, electrode through drying process in oven and the coated electrode becomes loose. If used directly, the cathode material and anode material is easy to fall off and damage after being soaked by electrolyte. The electrode can be pressed by the battery electrode roller machine. The stability, firmness and electrochemical properties of the pressed electrode were improved, and t...

If the surface of the prepared battery electrode is flat, there is no significant particulate matter. In addition, there is no obvious material drop in the baking, room temperature cooling and transfer process, so it can be preliminarily judged that the preparation of pole sheet is qualified. Further comparison can be made on the quality, thickness of the battery electrode, and the dropping of the...

After the battery cells of the cylindrical battery passes through the rolling groove by battery grooving machine, the next step is very important: drying the battery cells. Battery cell in the production process will bring a certain amount of water, if not timely removal of water, control it within the standard value range, which will seriously affect the battery performance and safety performance...

Vacuum drying is to place the materials to be dried in a closed space, and use vacuum equipment to lower the air pressure in the closed space to an atmospheric pressure, while continuously heating the materials, so that the water molecules in the materials gradually diffuse to the surface of the materials due to the effect of pressure difference and concentration difference, and after the material...