welcome to XIAMEN TOB NEW ENERGY TECHNOLOGY Co., LTD..

中文

XIAMEN TOB NEW ENERGY TECHNOLOGY CO., LTD.

Provide a full set of solutions for battery machines.

sales tob.amy@tobmachine.com
tech support +86-18120715609

Products

Home
>
Sodium ion Battery Solution
>
Automatic Battery Electrode Stacking Machine for Sodium ion Battery

Hot Products

加载中...

Automatic Battery Electrode Stacking Machine for Sodium ion Battery

This automatic sodium ion battery electrode stacking machine is mainly used in the Z-type stacking process of sodium-ion pouch cells.

Brand:
TOB NEW ENERGY
item no.:
TOB-ADP-300B
order(moq):
1set
Payment:
L/C,T/T
product origin:
China
shipping port:
XIAMEN

inquiry now

Product Detail

Automatic Battery Electrode Stacking Machine for Sodium ion Battery

SPECIFICATIONS

TOB-ADP-300B Equipment overview and process flow

This sodium ion battery stacking machine is mainly used in the Z-type stacking process of sodium-ion pouch cells.

The cathode and anode electrodes are respectively in the material box and manually fed into the stacking machine. The separator automatically unwinding, pass through the tension mechanism and the correction mechanism, and then is introduced into the stacking table.

The manipulator repeatedly moves left and right, and the suction cup mechanism of the manipulator takes out the cathode and anode electrodes from the material box respectively, then performs the stacking process after secondary precise positioning, also drives the separator to move left and right.

There are four sets of press-blade mechanisms on the stacking table to compress the electrodes. After the stacking is completed, the cell is removed through the manipulator clamping mechanism, the separator is cut off, and the cell is transferred to the taping station for automatic taping.

At the same time, the automatic stacking of the next cell is started, and the cell that has been teped are automatically unloaded.

Equipment features

1. High precision: Through the precise positioning of the electrodes, the overall position accuracy of the electrodes during stacking is guaranteed to be ±0.3mm.

2. Separator accuracy: automatically unwinding, tension control, integral module correction, separator alignment accuracy ±0.3mm.

3. Reliability: The parts in high precision and high speed are fixed by pins.

4. Dust control: the material box is equipped with an effective dust suction mechanism, the suction rod of the suction cup is made of non-metallic material.

5. Measures for multi-piece and missing piece: the material box swings the wind, the piece brush, the manipulator shakes to separate the electrode.

Stacking Machine Specification

Item	Specification
Overall dimensions	W2400 x L1800 x H2200mm (dimensions are subject to the final design)
Weight/bearing	About 2000Kg,＞450Kg/M²
Color	Gray (if Party A has color requirements, please provide color standard samples)
Power supply	AC220V 50Hz, Voltage fluctuation ±10%, Power: 3KW
Compressed air	0.5～0.7Mpa (5～7kgf/cm²), 200L/min
Ambient temperature	5～35℃
Relative humidity	5～55% HR
Air/dust	It does not contain salty gas, toxic and corrosive gas, and there should be no conductive dust
Magnetic and vibration	There should be no magnetic field affecting the device, there should be no obvious vibration.

Equipment technical parameters

Item	Parameters
Stacking speed	1.3～1.5s/pcs
Alignment accuracy of electrode and separator	±0.3mm
Alignment accuracy of the end face of the separator	±0.3mm
Alignment accuracy of adjacent electrodes	±0.2mm
Overall alignment accuracy of the electrodes	±0.3mm
Stacking layers	Can be set within the thickness range
Separator wrapping process	No（If you need, this can be add）
Qualified rate	99% (defects caused only by this machine)
Utilization rate	98% (fault caused only by this machine)

Material specification

	Material	Length mm	Width mm	Thickness um	Iner diameter mm	Outer diameter mm
Cathode electrode	Piece	150～300	100～265	100～200	-	-
Anode electrode	Piece	150～300	100～265	80～150	-	-
Cathode tab	-	8～20	10～80	6～30	-	-
Anode tab	-	8～20	10～80	6～30	-	-
Separator	Roll	-	150～300	12～45	φ76.2	φ300
Tape	Roll		10～20	20～50	φ76.2	φ150

Description:

1. The length of the electrode refers to the length of the electrode in the direction of the tab, excluding the length of the tab.

2. The electrodes have no obvious phenomenon of powder falling, no obvious wavy edge, die-cutting error is less than 0.3mm.

3. The incoming electrodes have no obvious warpage and deformation, and the incoming electrodes have no obvious adhesion.

4. The bending error of the separator: 1mm/1000mm.

Item	Spec.
T（mm）	4～15
W（mm）	100～265
L（mm）	150～300
Tab L1（mm)	8～20
Tab direction	On the same side / on different sides

PRODUCT DISPLAY

Sodium ion Battery Stacking Machine

Email : tob.amy@tobmachine.com

Skype :amywangbest86

Whatsapp/Phone number :+86 181 2071 5609

Related Tags :

Stacking machine

Battery stacking machine

Electrode Stacking Machine

Pouch Cell Stacking Machine

Automatic Stacking Machine

Send a Message

If you are interested in our products and want to know more details,please leave a message here,we will reply you as soon as we can.

our works

related products

Sodium-Ion Battery Electrode Coating Machine

The TOB-SY300J-2 Intermittent Lab Coater is a three-roll transfer coating machine, can be continuous and intermittent coating, suitable for sodium-ion battery and lithium-ion battery coating process.

Lab Vacuum Mixer for Sodium-ion Battery Research

TOB-XJB-500 Planetary vacuum mixer is one high efficiency equipment with vacuum molding and dispersion function, it is suitable for the anode and cathode electrode slurry mixing process in Sodium-ion battery lab research.

2000L Mixer for Sodium-ion Battery Production Line

This 2000L planetary mixing machine is suitable for mixing and dispersing the powder and liquid materials of various common batteries, especially suitable for sodium-ion battery production lines.

Film Applicator for Sodium-Ion Battery Research

TOB New Energy provide various types of film applicators for sodium-ion battery research. Different coating widths, thicknesses, and precisions can be customized.

Lab Coating Machine for Sodium-Ion Battery Research

TOB-VFC-Series lab coating machine is mainly used for sodium-ion battery and lithium-ion battery electrode coating process. It is suitable for laboratories, universities, and research institutions to conduct battery research.

Calendering Machine For Sodium-Ion Battery Electrode

We provide JS-series calendering machine for sodium-ion battery electrode rolling press. The calendering machine is a compact hot rolling press machine mainly serves for pressing samples in the lab or other applications in the material research especially for increasing active material density of the electrode in sodium-ion battery and Li-Ion batteries research after coating.

Sodium-Ion Battery Electrode Calendering Machine

The working width of this sodium-ion battery electrode calendering machine is 300mm. The this sodium-ion battery electrode calendering machine is aimed at the high precision rolling of cathode and anode electrodes in sodium-ion battery research and manufacturing.