60L Vacuum Planetary Mixing Machine

（1）Lower Barrel Parts

Design total volume

88L

Elective volume

29-60L

Container inner diameter

500mm

Container inside depth

450mm

Container material

The parts in connect with materials is 304 stainless steel

Tempering jacket form

Single jacketed barrel wall for cooling or heating; single jacketed barrel bottom for cooling or heating

Tempering jacket port

G3/4"，with quick opening movable joint

 jacket withstand pressure≤0.4MPa

Tempering jacket circulation system

prepared by customer

jacket water inlet temperature≤8℃，

cooling water flow＞30L/min

Discharge materials

form

bottom of 1pcsG1-1/2" Three piece discharge ball valve with 2" standard ISO quick connect clamp fitting

Design environment

temperature

-10～+120°C

Move mode

Casters move

(2)Mixing Parts

Working frequency

5-50hz

Mixing power

7.5kw

Mixing blade speed

6-61rpm

Planetary box rotate

speed

3-35rpm

Mixing blade diameter

286mm

Mixing blade model

Variable cross-section spiral twist type, 90 ° helix

Mixing blade material

304 stainless steel

Mixing blade line

speed

0.1-1.0m/s

Mixing blade number

2pcs

Distance between blade and blade

4.6±2.5mm

Distance between blade and barrel wall

3±1.5mm

Distance between blade and barrel

bottom

3+1mm

(3)Dispersing Parts

Working frequency

5-50hz

Dispersing power

11kw

Dispersing rotate

speed

315-3530rpm

Dispersing plate

diameter

110mm

Dispersing model

Serrated

Dispersing plate material

304 stainless steel

Dispersing line speed

2 -20m/s

Dispersing number

4pcs

Dispersing shaft

number

2pcs

 (4)Scratch the Wall Parts

Scratch wall bracket material：304 stainless steel

Scratch wall material：Teflon

Scratch wall rotate speed：Consistent with planetary box rotate speed

Removable or not：Removable design (Need to remove when scraping the wall on high viscosity process)

 (5)Base and Lifting Parts

Parts materials：High rigidity structural carbon steel

Lifting way：electric

Lifting guide：High-precision linear guide

Lifting itinerary：≤570mm

 (6)Upper Barrel Parts

Upper barrel material：304 stainless steel

Vacuum feeder interface: Quick-open interface DN100 1pcs

Powder feed port：quick opening interface DN50 1pcs

Liquid feed port：ISO standard 1" quick interface 1pcs

Sight glass port: DN80 tempered glass sight glass 2pcs

Vacuum port: G 3/4" 1pcs

Exhaust port: G1/2"1pcs

Digital vacuum gauge port：M14×1.5 Internal thread metric tooth interface 1pcs

 (7)Control System

Electrical cabinet：Used to install low-voltage electrical components such as inverter

Manual operation panel：For placement buttons, knobs, gauges etc

Power supply：AC 3×380V±5﹪，50Hz

Control mode：Electric + liquid control

Power control and speed adjustment mode: Inverter start and control

Cooling mode：Air-cooled (wind cooling) and liquid cooling

Operation mode：Panel operation on the electrical cabinet with corresponding buttons + knobs

Digital temperature display gauge：material temperatureEmergency

Stop button：1pcs

Alarm system：Over-temperature alarm, over-temperature alarm shutdown, alarm shutdown

Speed display: Touch screen shows the speed Power instructions: 1pcs

Timer: 1pcs, to control both dispersion and mixing

Note: If you choose the HMI system configuration, the control system is integrated into the touch screen control

(8)Safety Chain System

Emergency stop: press the emergency stop switch, the device immediately stop, and can not do anything

Start low-speed mixing: can lift the barrel and rotate at the same time

High-speed dispersion: The barrel cannot be turned until it is in place

Safe lock in operation: When the machine is running, the mixing barrel can not be lowered, can not open the mixing barrel.

Prevent vacuum tube backflow: special vacuum buffer tank design, can effectively prevent the vacuum pump oil back to the mixing drum phenomenon

Stop running fault: Inverter comes with overload, overcurrent, overvoltage, leakage, lack of equal protection

Mixing barrel lift: stirring barrel in place to rise

Mixing barrel did not return to normal pressure can not be dropped.

After mixing barrel rises in place and high-speed dispersion, then can be started.

After mixing barrel rises in place, with locking protection system, to prevent while the mixing barrel rises to high place abnormal fall.

Dry mixing stage, while the barrel rising, the stirring paddle need to rotate at the same time.